(6 Open Positions)
Minim and Tonye Nigeria Limited brings extensive technical knowledge and hands-on experience in Engineering, Procurement, Construction, and Commissioning across Africa. Our dedicated team ensures reliable, compliant service throughout all operations, with internal audits aligned with international best practices and our core values.
Registered and fully operational since April 1st, 2005, M&T began as an infrastructure-focused development firm with strong expertise in design, construction, procurement, fabrication, and engineering maintenance. As a 100% Nigerian-owned company, M&T also partners internationally with oil and gas industry specialists. Our core services include construction, industrial fabrication and coating, O&M, and mechanical engineering.
We are hiring for the following roles:
Job Title: Principal QC Inspector (Coating and Insulation)
Location: Rivers
Employment Type: Full-time
Job Description
To carry out quality control checks for insulation, painting, and coating operations across all project locations.
Ensure all tasks are compliant with specified standards and procedures while assisting EPC Contractors in delivering quality-focused outputs.
Key Duties
- Report directly to the BN Package Quality Engineer(s)
- Follow Company HSSE guidelines and safety rules
- Observe supplier and contractor inspection/test work per approved ITPs and QA plans
- Drive quality awareness and promote performance improvement initiatives
- Assist in evaluating Supplier QA documents and inspection plans
- Confirm safety protocols such as LOTO and PTW are in place
- Carry out quality reviews at supplier and contractor sites
- Update inspection results promptly on internal systems
- Ensure updated drawings, standards, and specifications are being used
- Liaise effectively with engineering and construction teams
- Assist Company teams with relevant assignments as needed
- Confirm executed tasks meet quality expectations through direct inspections or documents
Main Functions
- Emphasize HSSE policy with all contractors and teams
- Supervise coating (fireproofing, metalizing) and insulation inspections
- Check material certificates against specs
- Ensure all tools and test equipment are up to date and certified
- Validate proper equipment preservation methods are followed
- Confirm compliance with Human Factors and layout requirements
- Witness and record site material inspections
- Confirm installed fireproofing complies with safety classifications
- Flag and report counterfeit or substandard materials
- Perform in-progress inspections per project inspection requests
- Participate in safety walkthroughs and team quality sessions
- Monitor and review contractor quality documentation
- Support internal quality audits when requested
- Join flaw detection efforts (Flawless Program) and attend project handover walk-downs
- Raise, track, and verify resolution of quality issues and non-conformance items
- Advise and collaborate with contractors to fix quality gaps
- Track quality trends and propose solutions
- Resolve technical quality issues in coordination with engineering leads
Qualifications
- B.Sc. or HND in Mechanical, Metallurgical/Materials Engineering, or related
- At least 12 years in QA/QC, with field coating/insulation experience in oil & gas
- NACE or SSPC Coating Inspector Certification (min Level II)
- Familiar with standards (NACE, ASME, ISO, NFPA, SSPC, etc.)
- Knowledge of audit frameworks (ISO/API)
- Proficient with inspection tools and visual instruments
- Strong in team communication and leadership
- Comfortable using Microsoft Office, digital inspection platforms
- Must be able to multi-task, be self-motivated, and manage documentation efficiently
- Must have corrected visual acuity of at least 20/40
- Professional body memberships like COREN or MNSE are a plus
Application Closing Date: 30th April, 2025
How to Apply: Send CV to recruitment@minimandtonye.com using the job title as the email subject.
Job Title: Senior QC Inspector (Coating and Insulation)
Location: Rivers
Employment Type: Contract
Job Description
This role involves performing QC inspections for insulation, painting, and coating jobs across all project locations.
Ensure all related tasks are completed per project quality standards and safety guidelines, supporting EPC Contractors in achieving top-quality deliverables.
Key Duties
- Report to the Bonga North (BN) Package Quality Engineer(s)
- Follow Company HSSE regulations and safety rules
- Observe and validate contractor inspection/test work per the approved plans
- Promote a culture of quality across all project levels
- Help evaluate Supplier Quality Documents and ITPs
- Ensure safety systems like LOTO and PTW are active
- Conduct quality reviews at vendor and project sites
- Record and upload inspection results using digital systems
- Confirm all specs, codes, and drawings are current and used
- Professionally interact with site engineers and QA teams
- Support company teams as directed based on experience
- Confirm execution through document checks and physical inspection
Main Functions
- Reinforce HSSE awareness among suppliers and project staff
- Supervise inspections for insulation and coatings, including fireproofing and spray metalizing
- Review material/test reports for accuracy
- Confirm calibration of NDT and measurement equipment
- Verify proper handling and storage of project equipment
- Ensure Human Factor Engineering requirements are followed
- Participate in site inspection for new materials/equipment
- Validate fireproofing meets safety class certifications
- Identify and report any suspect or counterfeit materials
- Witness ongoing work per inspection requests and ITPs
- Join safety meetings and participate in team audits
- Monitor and track quality documents from contractors
- Provide support during internal quality checks
- Participate in Flawless Delivery Programs
- Attend final project walk-downs for sign-off
- Issue and resolve NCRs as needed
- Address quality management concerns directly with contractors
- Analyze quality data and suggest process improvements
- Help resolve field quality issues alongside engineering leads
Qualifications
- Degree or equivalent in Mechanical or Materials Engineering
- Minimum of 8 years in QC inspection, especially in coating or insulation fields
- Minimum NACE or SSPC Level II Coating Inspector certificate
- Membership in COREN or MNSE is beneficial
- Familiar with relevant codes (ISO, NACE, ASME, SSPC, NFPA)
- Ability to interpret and review QA/QC documents and plans
- Able to identify counterfeit items and raise concerns
- Familiar with HFE and project design standards
- Understanding of ISO/API audit systems
- Strong reporting and inspection record management
- Fluent in written and spoken English
- Must be well-organized and focused under pressure
- Capable of multi-tasking and using inspection software
- Must have corrected vision to at least 20/40
Application Closing Date: 30th April, 2025
How to Apply: Send CV to recruitment@minimandtonye.com using the job title as the email subject.
Job Title: Senior QC Inspector (Mechanical – Pressure Equipment, Piping, Structure, Welding, NDT)
Location: Rivers
Employment Type: Contract
Job Description
Responsible for performing quality inspections of mechanical systems, including welding, piping, structural components, and pressure equipment.
Ensure all mechanical work meets contract standards for quality, safety, timeline, and cost while supporting EPC Contractor’s project delivery.
Key Duties
- Report directly to BN Package Quality Engineer(s)
- Comply with Company HSSE policies and safety rules
- Monitor vendor and contractor activities per approved ITP and quality documents
- Promote ongoing improvement and high-quality culture throughout the project
- Review and confirm Supplier QA documentation before project work begins
- Ensure PTW, LOTO, and safety systems are implemented
- Conduct vendor site surveillance to ensure compliance
- Log inspection outcomes using project QA software
- Ensure latest standards, drawings, and codes are used onsite
- Collaborate professionally with engineering, QA, and field teams
- Perform additional duties as needed in line with skills and expertise
- Verify contractor work via inspections or documentation
Main Functions
- Reiterate safety guidelines to contractors and project staff
- Supervise inspections of welding, piping, and mechanical systems onsite and at workshops
- Confirm material and test certificates meet required codes
- Ensure all inspection tools and equipment are calibrated
- Check that welding materials are properly stored and certified
- Oversee material receipt inspections for potential defects
- Identify and report non-compliant or fake items immediately
- Witness mechanical fabrication per ITPs and inspection plans
- Validate hydrotesting and all safety checks per code
- Track contractor performance against project QA benchmarks
- Review technical design documents and flag issues early
- Join HFE verification walks per specification
- Participate in safety meetings and punch-list verification
- Review and maintain quality records from suppliers
- Validate welder qualifications and ensure traceability of joints
- Oversee NDT/PWHT processes and documentation
- Assist with audits and walkthroughs
- Track, resolve, and follow up on NCRs
- Provide solutions for ongoing technical quality issues
Qualifications
- B.Sc./HND in Mechanical, Materials, or related Engineering
- At least 8 years’ inspection experience in piping, welding, and mechanical QA
- Must hold CSWIP 3.1 or AWS CWI certification
- ASNT Level II in NDT (RT, PT, MT, UT) required
- COREN or other professional membership is an asset
- Familiar with ISO, API, ASME, NACE, NEC standards
- Capable of interpreting WPS, PQR, and welder certificates
- Skilled in reviewing inspection records and technical documentation
- Ability to manage audit processes and resolve field issues
- Strong written and verbal communication skills
- Able to work on multiple tasks with focus and accuracy
- Fluent in English (written and spoken)
- Must have 20/40 vision (corrected)
Application Closing Date: 30th April, 2025
How to Apply: Send CV to recruitment@minimandtonye.com using the job title as the email subject.
Job Title: Principal QC Inspector (Mechanical – Pressure Equipment, Piping, Structure, Welding, NDT)
Location: Rivers
Employment Type: Contract
Job Description
This role oversees quality inspection for mechanical systems such as piping, static equipment, welding, and NDT at project sites.
Ensure full compliance with contractual and quality standards, while ensuring timely and cost-effective project delivery in partnership with EPC Contractors.
Key Duties
- Reports to BN Package Quality Engineer(s)
- Adheres strictly to all HSSE standards
- Verifies that supplier/contractor work aligns with approved QA documentation
- Instills continuous improvement across all quality-related activities
- Reviews all contractor quality documents before construction begins
- Verifies LOTO, PTW, and other safety controls are in place
- Ensures all inspections follow project standards and documentation
- Tracks inspections using internal QA platforms
- Collaborates across project teams and field inspectors
- Supports team with responsibilities matching skill level
- Validates all contractor execution through field reviews and documentation
Main Functions
- Ensures safety expectations are reinforced across project teams
- Supervises inspections on all welding and structural works
- Validates all testing and equipment certifications
- Oversees hydrotesting and ensures safety protocols are observed
- Reviews design drawings and provides proactive feedback
- Manages traceability and welding records
- Monitors quality trends and delivers corrective actions
- Participates in audits and handover inspections
- Identifies root causes of recurring QA issues
- Leads inspection teams and mentors junior inspectors
- Works closely with engineering team to resolve issues
- Engages in flaw detection programs and quality improvement strategies
Qualifications
- Bachelor’s Degree or equivalent in Mechanical/Materials Engineering
- Minimum of 12 years’ QA experience in welding, piping, and pressure systems
- CSWIP 3.1 or AWS CWI certification required
- ASNT Level II in RT, UT, PT, or MT
- Strong knowledge of ISO, API, AWS, ASME, NEC, NACE codes
- Ability to read and interpret technical specs, welding maps, and test reports
- Professional affiliations (COREN, MNSE) are a plus
- Knowledge of planning tools, document control, and NDT requirements
- Organized, analytical, and able to troubleshoot complex QA issues
- Proficient in English (spoken and written)
- Must have visual acuity corrected to at least 20/40
Application Closing Date: 30th April, 2025
How to Apply: Send CV to recruitment@minimandtonye.com using the job title as the email subject.
Job Title: Principal QC Inspector (Electrical and Instrumentation)
Location: Rivers
Employment Type: Contract
Job Description
This role is responsible for ensuring quality compliance of electrical and instrumentation works across oil and gas projects.
The inspector oversees testing, validation, and installations, ensuring all activities align with design standards, codes, and company policies.
Key Duties
- Reports to BN Package Quality Engineer(s)
- Adheres to all HSSE rules and procedures
- Supervises contractors’ E&I activities per ITP and project QA plans
- Promotes quality focus across all construction disciplines
- Verifies PTW, LOTO, and energy isolation systems
- Ensures installation and inspection meets international codes
- Confirms equipment is certified and preserved properly
- Conducts inspections on cable routing, grounding, and loop checks
- Ensures installation meets HFE and operational requirements
- Verifies area classification for telecom and electrical systems
- Flags and resolves NCRs
- Reviews calibration and loop test records
- Supports final mechanical and pre-commissioning walk-downs
- Confirms inspection results through documents or visual checks
Main Functions
- Reinforces HSSE with teams and contractors
- Supervises E&I inspections onsite and offsite
- Verifies compliance with NEC, IEC, API, NFPA, ISO standards
- Validates test tools and instrumentation are calibrated
- Reviews vendor quality records
- Ensures proper tagging, documentation, and recordkeeping
- Participates in audits and Flawless Execution Programs
- Collaborates with engineering and commissioning teams
- Supports reviews of functional testing and logic checks
- Oversees inspection of SIS, PLC, DCS, F&G, and telecom systems
Qualifications
- B.Sc. in Electrical, Instrumentation, or Control Engineering
- Minimum 12 years’ QA experience in E&I for oil and gas projects
- COREN or MIEEE membership is preferred
- Knowledge of CompEx or hazardous area classification is an asset
- Experience in loop testing, cabling, tubing, field devices, and I/O verification
- Strong documentation and audit experience
- Familiar with ISO 9001, IEC 60079, API, and local regulations
- Must be fluent in English (speaking and writing)
- Should have 20/40 corrected vision minimum
- Organized, solution-focused, and experienced in audit participation
Application Closing Date: 30th April, 2025
How to Apply: Send CV to recruitment@minimandtonye.com using the job title as the email subject.